How much is the cement blanket

Hanji New Material Cement Blanket Inspection Project

2.1 Before laying the composite material blanket, it is required that the base be fully tamped. The simple measurement method is: use Φ 12mm steel brazing, use 30kg pressure, insert the soil less than 5cm.

Number of inspections: random inspection

Inspection method: observe and measure with tools.

2.2. The bottom of the ditch and the side of the ditch are required to be flat; the deviation of the ditch cross section size is not easy to exceed 5cm. The base is leveled. After laying the composite material blanket, the flatness is measured with a 3m string, and the average loss is not more than 20mm.

Number of inspections: random inspection

Inspection method: observe and measure with steel ruler.

2.3. The error of anchor spacing is required to be ± 5cm; the construction error of screw spacing is ± 2cm. There should be no missing or missing nails, and the nails should be firmly fixed.

Number of inspections: all inspections

Inspection method: observe and measure with steel ruler.

2.4 Watering should be even and watered until the blanket becomes darker. Each square meter is not less than 9kg (calculated by 10mm thick blanket), and watering is not necessary. More watering does not affect the quality of the project.

2.5. The slurry must be uniform and the thickness should be uniform. The cement: water mass ratio is 1: 3 ～ 1: 4. There should be no missing brushes or fewer brushes. 8

Number of inspections: random inspection

Inspection method: observation.

2.6. The PVC drain pipe of the drainage hole shall be arranged in a plum shape of 2m × 2m, shall not be omitted, and shall be installed firmly.

Number of inspections: all inspections

Inspection method: observe and measure with steel ruler.

2.7. The reserved size of the end surface shall comply with the regulations: the top surface of the side slope shall have a width of 1-2m, and the bottom surface shall have a length of 50cm.

Number of inspections: all inspections

Inspection method: observe and measure with steel ruler.

2.8. The laying and installation of materials should comply with the requirements of the construction design, and should be stable and firm, tightly sealed, smooth and beautiful.

Number of inspections: all inspections

Inspection method: observe and measure with steel ruler.

The new cement blanket is a soft cloth impregnated with cement. It will hydrate in water and harden into a thin waterproof and fireproof durable concrete layer. The cement blanket uses a three-dimensional fiber composite structure (3D fibrematrix) woven from polyethylene and polypropylene filaments, and contains a specially formulated dry concrete mix (Dryconcretemix). The main chemical components of calcium aluminate cement are Al2O3, CaO, SiO2, Fe2O3. The bottom surface of the canvas is covered with polyvinyl chloride (PVC) lining to ensure that the cement blanket is completely waterproof. During on-site construction, there is no need for any concrete mixing equipment on site, as long as the concrete blanket is simply watered or immersed in water to cause hydration reaction. After setting, the fibers act to strengthen the concrete and prevent cracking. Currently, cement blankets have a thickness of 10 mm.